0512-259 5323
info@espinnanotech.com
+91-9451222560
0512-259 5323
info@espinnanotech.com
+91-9451222560
responsive img

WET SPINNING

responsive img

Solution /wet spinning system consists of the following parts: -

  • Extrusion system
  • Dope tank: Capacity: 1-5 lit, Temp: Room temp to 150°C, Pressure gauge and inlet for applying high Nitrogen pressure (1- 6 bar)
  • Metering pump: Throughput: min - 1cc/min, Max can be decided based on requirement of minimum throughput (Zenith or equivalent quality pump to be used)
  • Spinnerets: Three number of spinnerets with desired number of holes
    • First coagulation bath: Temp: Min-room temp, Max-90 °C
    • Take-up roller assembly with AC motors: Min speed-5mpm, Max speed - 100mpm
    • Second coagulation bath: Temp: Min-room temp, Max-90 °C
    • First draw roller assembly with AC motors: Min speed-5mpm, Max speed - 100mpm
    • Drawing bath: Temp: min-room temp, Max-90 °C
    • Second draw roller assembly with AC motors: Min speed-5mpm, Max speed -100mpm
    • Washing bath: Temp: min-room temp, Max-90 °C/li>
    • Third roller assembly with AC motors: Min speed-5mpm, Max speed - 100mpm
    • Heater plate: Temp Min-room temp, Max-300°C
    • Traverse winder: Speed Min-5mpm, Max-100mpm (Model: Inverta 45M, Supplier, Lexon Winders Pune, email: sales@lexon.in, Tel.: (020) 2438 9040 / 2438 9132)
    • Common Control Panel with PLC to control all the speeds, temperatures, etc.
    • Heaters for bath (non-corrosive)
    • Wires and spares: (Fire retardant wires)
    • Plastic spools (25)
    • Crimper
  • Doctor bar assay (tyre roller) : Size 50 mm
  • Complete pneumatic operating system to adjust the crimp & fiber pressure
  • Twin Shaft Geared motor Capacity: 1 HP
  • Control Panel Unit
  • Crimp Denier Max: 1000
  • No of filament per tow: 10 – 300
    • Cutter
  • Mechanical Pressurized cutting system with cut length adjustment
  • Cut length: from 6 mm to 50 mm
  • Control Panel unit
  • Main motor: 2 HP
    • Crimper cutter and Small heating/cooling utility to maintain temperature of all the four baths.
    • MOC for all parts with direct contact with dope solution: SS316<
    • Motors: All motors are flame proof
    • Working dimensions for machine: 10m long, 2m wide and 2m height.